Connect To A Bluetooth-Enabled Device - Philips AECP3000 User Manual

Connect to a Bluetooth-
enabled device
You can pair the WeCall phone with a
Bluetooth-enabled mobile device (such
as your mobile phone or tablet) or PC/
Mac. Then you can enjoy music from the
WeCall phone, or use it as a speaker phone
when you make mobile or VoIP calls.
Note
•
The effective operation range between the WeCall
phone and your Bluetooth-enabled device is
approximately 10 meters (30 feet).
•
As a power-saving feature, if there is no device available
for pairing and connection, the Bluetooth indicator on
the speaker turns off automatically in 5 minutes. You can
press to enable Bluetooth on the speaker again.
1
Enable Bluetooth on your Bluetooth
device.
2
Select 'WeCallPhone Philips' on your
Bluetooth-enabled device and if necessary
input '0000' as the pairing password.
» After successful pairing and connection,
the indicator turns solid blue and the
WeCall phone beeps.
8 EN
Note
•
To pair with a new Bluetooth-enabled device, you can:
•
1. Hold both +/- on the WeCall phone for more than 5
seconds to remove the existing Bluetooth connection.
•
2. Disable the Bluetooth function on the currently
connected device.
•
The WeCall phone can memorize up to 4 paired
devices. When you pair with another Bluetooth-enabled
device, the first memorized device will be overridden.