Advertisement
Play
The music streaming may be
interrupted by obstacles between
the device and SB5200, such as
walls, or other devices nearby that
operate in the same frequency.
Charge
Battery low: Flashing red light
Charging ongoing: Green light always on
Charging complete: Light off
To play through the MP3 link cable,
switch off Bluetooth on the Bluetooth
device.
Sound mode
Press the button repeatedly to
switch between the indoor and
outdoor sound effects.
Note: During battery charging through the
USB connector, music play on SB5200
reduces to a low volume level.
To play music from multiple speakers, do
the following:
1. Use the audio cable to connect two
speakers, one plug in the OUT socket and
the other plug in the IN socket;
Sound mode
2. On the Bluetooth device, connect to a
speaker.
The first speaker works as the master one.
Select your sound options on the master
speaker.
Reset Bluetooth
LED
2 sec
SB5200 can remember three paired devices. The fourth
paired device will replace the first one. To clear the paired
devices from your speaker , press and hold the button until
the blue light flashes.
On the speaker, you enter the pairing mode. On the paired
device, 1. unpair SB5200; 2. search for and connect Philips
SB5200 again.
Sound mode
Reset Bluetooth
LED
RESET
LED
AUDIO IN
AUDIO OUT
LED
Maximum or minimum
volume level is reached.
Advertisement
