Recording Details - RCA CC6254 User Manual

Recording
Recording Start/
Power switch
Stop button
POWER indicator
STOP R RETAKE
36

Recording Details

1.
2.
3.
4.
5.
F
Remove the lens cap.
Set the Power switch to
record or manual record mode). (The POWER
indicator comes on.)
Adjust the viewfinder.
Press and release the Recording Start/Stop
button to start recording. (
viewfinder (but won't be recorded.))
When finished recording, press and release the
Recording Start/Stop button again to stop
recording. The camcorder is now in the record-
pause mode. (PAUSE appears in the viewfinder.)
Notes:
• If the Record-Standby mode continues
for 5 minutes without performing Zoom
or any other operations, the camcorder's
power shuts off automatically. Set the
Power switch to OFF, and then back to
or to turn the camcorder on again.
M
• If you are recording on a tape from the
middle (such as when a tape is removed
and reinserted during recording), use the
Retake function (see page 38) to find the
end of the last recording so you do not
erase any of it.
• To remove the icons from the
camcorder's display during recording, see
page 58.
or (automatic
A M
REC
appears in the
A
Chapter 3