Table of Contents
Advertisement
IMPORTANT: Don't leave water in the tank between uses, this can effect the steamers performance, the water tank
should to be emptied and rinsed after each use.
Emptying the water tank
Press the water tank
release button and pull
tank to remove.
Clearing blockages
If there is an obstruction to
the steam flow through the
machine, steam may
be released through the
bleed valve.
Taking care of your machine
Pull the tab on water tank
cap to open.
Press the button on the
neck of the machine to
remove the floor head.
Empty any excess water
over the sink.
Using the de-scaling pin,
insert the full length of the
pin into the nozzle. It may
be necessary to twist the
pin to insert fully.
Remove the pin from
the nozzle. Holding the
main body of the steamer
vertically, tap the nozzle on
a hard surface to release
any mineral deposits.
Hide quick links:
Advertisement
Table of Contents
