System Settings; Fan Settings - Johnson Controls S1-TTSCC01 User's Information Manual

542937-UUM-B-0212

SYSTEM SETTINGS

Your Communicating Control is preset to OFF mode (neither heating or cooling modes are
selected).
In Non-Programmable mode, Auto mode cannot be activated. If Auto mode is desired, change the
View/Mode to either Programmable or Advanced Programmable (see page 5 for details).
11:07AM Thu 21 Jul
72°
71
Humidity3 dity
Alert: Change Filter
Emergency Emergency
Heat Heat
Fan Fan
Dealer Dealer
Alert: Change Filter Alert: Change Filter

FAN SETTINGS

In non-programmable mode, the fan setting defaults to the schedule currently active in the calendar.
In programmable mode, the fan setting defaults to schedule mode.
1. Press Menu at the bottom right side of your screen.
Or press the quick access Fan icon on the right side of your screen.
6
55°
°
ON
Auto
y 3 3 3 30% 0 0 0 0 0 % % % % %
72°
Menu
Humidity Humidity Status Status Settings Settings
Tools Tools Clean Clean Schedule
Close Close
• Off mode: Neither Heating or Cooling icons are
illuminated.
• Heat mode: Heating icon is illuminated
(red glow ring indicates heat equipment opera-
tion).
• Cool mode: Cooling icon is illuminated
(blue glow ring indicates cool equipment opera-
tion).
• Auto mode: Both Heating and Cooling icons
are illuminated (red/blue glow ring indicates
heat/cool equipment operation).
• Emergency Heat: Emergency Heat button is
selected via the Menu screen
(only for heat pumps with electric heat strips or
heat pumps with furnace).
Johnson Controls Unitary Products