Link Module For Two Contactors In Series; Description; Mounting - Siemens SIRIUS 3RT Manual

Accessories

9.19 Link module for two contactors in series

9.19 Link module for two contactors in series
9.19.1

Description

The link module for 2 contactors in series is a module used to connect two contactors in
series. It is used in Safety applications, for example, where two switching points located in
series are required.
The link module for 2 contactors in series is available in the following versions.
Table 9- 33
Size
S00
S0
S2
9.19.2

Mounting

Mounting the link module for 2 contactors in series (size S00)
①
354
Versions of the link module
Insert the pins of the link module into the contactor's terminal openings from above until they
are securely in position. Make sure that the wedge (a) engages in the groove (b) provided on
the contactor for this purpose.
Article number
3RA2916-1A
3RA2926-1A
3RA2936-1A
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006