Download Print this page

Montgomery Ward DMF-008C Instruction Manual

Cordless reciprocating saw & worklight

Advertisement

Quick Links

Cordless Reciprocating Saw & Worklight
Instruction Manual
Model: DMF-008C
Item No.: 743504
Montgomery Ward Customer Service
1112 7th Avenue, Monroe, WI 53566
8:00 a.m. to Midnight, Monday through Friday
Wards.com 1
888
557
3848
Wards.com 1
888
557
3848

Advertisement

loading

Summary of Contents for Montgomery Ward DMF-008C

  • Page 1 Cordless Reciprocating Saw & Worklight Instruction Manual Model: DMF-008C Item No.: 743504 Montgomery Ward Customer Service 1112 7th Avenue, Monroe, WI 53566 8:00 a.m. to Midnight, Monday through Friday Wards.com 1 3848 Wards.com 1 3848 • • • • •...
  • Page 2: Table Of Contents

    PLEASE SAVE THESE INSTRUCTIONS bridge the gap between the battery terminals. © 2016 Montgomery Ward, Inc. All rights reserved. 4. Do NOT use tool if the power switch does not properly work. Any tool that cannot be controlled with the power switch is dangerous and must be replaced.
  • Page 3: Parts & Features Reciprocating Saw

    Important Safeguards Important Safeguards (cont’d) (cont’d) CORDLESS POWER TOOL GENERAL SAFETY: WORKLIGHT SAFETY: 1. Power tool should be switched to OFF when installing battery to avoid equipment damage and personal injury. 2. Do NOT expose power tools to extreme temperatures or fire. 1.
  • Page 4: Reciprocating Saw Assembly

    How to Use the Reciprocating Saw Reciprocating Saw Assembly (cont’d) Always remove battery before inserting saw blade. Do not feed the saw blade into the workpiece until it has fully come up to the set speed or serious injury may result. The saw blade can be fitted with the teeth along the bottom or top edge of the saw.
  • Page 5: Charging The Battery

    Charging the Battery Parts & Features Worklight IMPORTANT: Batteries need to be fully charged before initial use. Do NOT charge batteries in direct sunlight. Charge in temperatures between 41–104° F. 1. Remove battery from drill/worklight by pressing the battery release button and sliding it forward.
  • Page 6: Troubleshooting

    Troubleshooting Specifications Worklight Reciprocating Saw Problem Possible Cause Remedy Speed: 3,000 strokes per minute Beam Type: Fixed The saw does not start. Battery discharged. Recharge the battery. Stroke Length: 7/8" Lumens: 110–130 Overload protection shut Allow motor/battery to cool LED bulb: 3 W down the tool/battery.
  • Page 7: Year Limited Warranty

    (excluding shipping and handling charges). for one year from provable date of purchase. Please send returns to: Within this warranty period, Montgomery Ward will repair or Montgomery Ward, Inc. replace, at its option, defective parts of this...