Advertisement
Quick Links
Advertisement
Summary of Contents for Nanometrics Trillium 240
- Page 1 Trillium 240 Seismometer Insulating Cover...
- Page 2 2. Place the gasket on the pier with the gasket alignment holes roughly centred over the East- West sensor alignment line. 3. Place the Trillium 240 in the gasket on the pier and then align the sensor (see the Trillium 240 User Guide for sensor alignment recommendations).
- Page 3 4. For installations similar to examples (A) and (C), put the rectangular alignment plugs back into the gasket holes. 5. Connect the sensor cable to the Trillium 240. Angle the connector downwards about 30° to accomodate the cover. 6. Pull the cable end out through the cable outlet.
- Page 4 Dimensions Support If you need technical support, please submit your request via the Nanometrics customer support site, or by email or fax. Include a full explanation of the problem. Customer support site: http://support.nanometrics.ca/ Email: techsupport@nanometrics.ca Fax: To: Support, at +1 613-592-5929 Trillium 240 Seismometer Insulating Cover Installation Guide •...