Adjustment (Lc-40Le265T); Entering And Cancel The Adjustment Process Mode; Remote Controller Key Operation And Description Of Display In Adjustment Process Mode; Chapter 3. Adjustment - Sharp LC-32LE265T Service Manual

LC-32LE265T / LC-40LE265T
CHAPTER 3.
ADJUSTMENT
[1] ADJUSTMENT ( LC-40LE265T )
[1] ADJUSTMENT PROCEDURE

1.Entering and cancel the adjustment process mode

1)While holding down the POWER and CENTER keys at the same time,plug in
the AC cord to turn the power.
2).Backlight turned ON,screen disply show Black pattern and LED blinking GREEN --> RED -->
GREEN -->RED.
3)Enter password "UP ( CH UP )-->DOWN (CH DOWN )--> UP (CH UP )" . (After 30 sec password not
keyed in or password keyed in wrong, go to previous Power Status (On,Stand by or OFF ).
4).Backlight turned On , screen display show Purple test pattern ( LED still blinking GREEN -->
RED -->GREEN --> RED )
5).Press the Center Key . ( The adjustment process mode screen appears. )
6).After run function, LED light to GREEN.
7).To cancel it, turn off the power using the POWER switch or remote control .
2.Remote controller Key operation and description of disply in adjustment process mode.
1.Key Operation
Remote controller Key
CH ( /
VOL ( + / - )
Cursor ( /
Cursor ( /
INPUT or remote
controller
ENTER
* Input mode i s swi t ched
JOY Key
)
)
UP/DOWN
)
LEFT/RIGHT
CENTER CENTER
when rel e vant adj u stment i s started so far as the
-
-
Turning a page (PREVIOUS /NEXT)
Changing a selected line
Input source switching (toggle switching ) Input source switching (toggle switching )
(ATV --> AV -->Component -->PC RGB )
-
3 – 1
Changing channel (UP/DOWN)
Changing volume (UP/DOWN)
(+10 /-10 )
Enter
i n put si g nal i s avai l a bl e .