Fujitsu AUU7RLF Design & Technical Manual page 14

 Wall mounted type
 Models: ASU7RLF1, ASU9RLF1, ASU12RLF1, and ASU15RLF1
• High efficient compact design and more comfortable airflow
Making the tube thin:
Thin: 0.276inch (7mm)
▼
0.197inch (5mm)
Volume reduction of heat
30%
exchanger:
• Quiet operation
Airflow mode can be set in 4 steps and more detailed airflow setting is possible. 21 dB only at
cooling operation (22 dB at heating operation).
• MIN. HEAT operation
The room temperature can be set to go no lower than50°F (10°C), thus ensuring that the room
does not get too cold when not occupied.
CAUTION
!
• When the room temperature is higher than 50°F (10°C), MIN. HEAT operation does not
start. Operation starts and maintains the room temperature at 50°F (10°C) when the
temperature drops below 50°F (10°C).
• When MIN. HEAT operation stops, the room set temperature quickly returns to the preset
temperature.
• Powerful operation
*Only available with Wireless RC.
20 minutes continuous operation by maximum airflow and maximum compressor speed is
possible. Rapid cooling and heating makes the room comfortable quickly.
Fan speed Noise level
Quiet 21
dB(A)
(7/9/12 TYPE)
MIN. HEAT
button ON
70
°F
(21 °C)
50
°F
(10 °C)
- 8 -
Indoor unit
operation
START