Receiving A Voice Call - Kenwood TK-285 Instruction Manual And User Handbook

Receiving a Voice Call

1 When a call is received, the caller's unit number
appears on the main display and "CAL" appears
on the 3-digit sub-display.
• If you have the caller's address set up in your
transceiver, the call address is displayed instead of
the unit number.
• Group conference calls are represented by "GRP"
rather than "CAL". Group broadcast calls are
represented by "BCC".
• Special calls are denoted as follows:
I-Fleet: A call from a different fleet (Inter Fleet).
I-Prefix: A call from a different prefix (Inter Prefix).
PABX: A call from a PABX telephone system.
PSTN: A call from a PSTN telephone system.
2 Press the PTT switch to respond to the call.
• The remaining call time appears on the display.
3 When the call ends, the display returns to the call
address which was previously displayed.
However, if you end the call by pressing the Clear
key, "END" momentarily appears on the display
before returning to the call address.
11