Body Lock Pillar Outer Panel Replacement
Removal Procedure
Warning:
Refer to
Approved Equipment for Collision Repair
1.
Disable the SIR system. Refer to
2.
Disconnect the negative battery cable. Refer to
3.
Remove all related panels and components.
4.
Repair as much of the damage as possible to factory specifications. Refer to
Warning:
Refer to
Sound Deadener Foam in the Lock Striker Pillars
5.
Note the location of the sealers and anti-corrosion materials and remove these components from the repair area as necessary. Refer to
Treatment and
Repair.
Locate and remove all factory welds (1). Note the number and the location of the welds for installation of the replacement part.
6.
Warning.
SIR Disabling and
Enabling.
Battery Negative Cable Disconnection and
Connection.
Dimensions - BodyDimensions - Body (Motor Compartment -
Warning.
Corvette).
Anti-Corrosion