Assembly - Rear Case - Samsung Galaxy S8 Disassembly & Assembly Manual

Assembly - Rear Case (1/2)

Rev1.0
1) Assemble the rear case, bottom piece first.
Screw specification: 3.2 mm, Silver
2) Assemble the rear case, top/middle piece.
3) Tighten 14 screws on the rear case bottom.
- Torque force : 1.3 kgf·㎠ ± 7%
(1.22~1.38)
Top piece
14 screws for the rear case
Bottom piece
[ Notice ]
Watch out not to give any damage on the antenna patterns during screwing.
- This document cannot be used without Samsung's Authorization -
Confidential