Sharp AH-S22AW2 Service Manual page 29

22. To remove the evaporator, remove the tube holder on
the rear side of the cabinet, slightly lift the left side, slide
it to the right, and remove it from the cabinet, pulling it
toward you.
How to remove the electric control box.
1. Remove the indicator assembly.
(Press and spread the upper hook, and the indicator
will be ready for removal.)
2. Remove the fastening screw of the terminal board.
3. Remove the thermistor holder from the control box.
4. Remove the board fastening screws.
5. Pull out the board.
29
AH-S22AW2
AH-S25AW2
the angle of transformer