SAFETY PRECAUTIONS WARNING: Service should not be attempted by anyone unfamiliar with the necessary precautions for this recording or playback equipment. The following precautions are necessary during servicing: Many electrical and mechanical parts in this recorder have Before returning the set to the customer, always perform an special safety-related characteristics for providing protec- AC leakage current check on the exposed metallic parts of tion against shock, fire and other hazards.
1. OPERATING INSTRUCTIONS 1-1. FRONT PANEL CONTROLS 1. Monitor Selector Switch (VIDEO A/B) Turn this Monitor selector switch A position for a signal fed through the rear panel VIDEO A connectors. Then, turn this Monitor selector switch B posi- tion for a signal fed through the rear panel VIDEO B connectors.
Page 6
Fig. 4 Single Connection To Video B INPUT terminal (Video signal cable) Monitor To Video A Monitor INPUT terminal To Video input (Video signal cable) terminal Video recorder To Video input terminal Video recorder Video camera (Rear panel) Fig. 5 Coaxial cable To Video input terminal Monitor...
Page 7
2. SERVICE ADJUSTMENTS ADJUSTMENT TIMING ADJUSTMENT PROCEDURE SETTING ITEM LOCATION PATTERN VR303 CONTRAST VR Adjust VR303 to make equal distance VERTICAL PATTERN GENERATOR AND BRIGHT between top-center and bottom-center. LINEARITY MODE CROSS-HATCHED VR TO CENTER. ADJUSTMENT PATTERN VR401 CONTRAST VR Turn off horizontal sync.