Table of Contents
Advertisement
1MRS756738
1.
1.1.
1.2.
1.3.
1.4.
Station Automation COM600 3.4
Logic Processor User's Manual
About this manual
Copyrights
The information in this document is subject to change without notice and should not be
construed as a commitment by ABB Oy. ABB Oy assumes no responsibility for any
errors that may appear in this document.
In no event shall ABB Oy be liable for direct, indirect, special, incidental, or consequential
damages of any nature or kind arising from the use of this document, nor shall ABB Oy
be liable for incidental or consequential damages arising from use of any software or
hardware described in this document.
This document and parts thereof must not be reproduced or copied without written per-
mission from ABB Oy, and the contents thereof must not be imparted to a third party
nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license and
may be used, copied, or disclosed only in accordance with the terms of such license.
Copyright 2009 ABB. All rights reserved.
Trademarks
ABB is a registered trademark of ABB Group. All other brand or product names men-
tioned in this document may be trademarks or registered trademarks of their respective
holders.
General
This user's manual provides thorough information on the Logic Processor OPC server
configuration for COM600.
Information in this user's manual is intended for application engineers who configure
the Logic Processor function in COM600. As a prerequisite, you should have basic
knowledge of logic programming and IEC 61131-3 standard.
Document conventions
The following conventions are used for the presentation of material:
•
The words in names of screen elements (for example, the title in the title bar of a
window, the label for a field of a dialog box) are initially capitalized.
5
Advertisement
Table of Contents
