When The Remote Control Is Not Receiving - Samsung AR09MSWXCWKNCV Service Manual

10-2-16 When the remote control is not receiving

1. Checklist :
1) Check if the connector was normally assembled.
2) Check the battery in remote control
3) All the lights out and check again : Change electronic typed to a
4) Put the set in operation and check the voltage of display PBA
5) Replace the display PBA
2. Troubleshooting procedure
If the connector was normally assemble?
Have the battery in remote control?
All the lights out ?
Re-check the connector
Exchange the display PBA
Samsung Electronics
YES
YES
YES
NO
rescent light
NO
Check the connector to normally assemble.
NO
Insert the battery in remote control.
NO
10-18