Rf Based Upgrade And Cloning - Philips HFL3011 Series Installation Manual

[Select Clone To TV]
When multiple clone files are
available on the USB drive
you can use this menu to
select the appropriate clone
to flash on the TV
The format for the Clone file
name is the following:
RoomID (5digits) CloneData
eg. 00124CloneData

6.7.2 RF Based Upgrade and cloning

[Auto Upgrade and Clone]
When turning on the TV will
systematically check for an
upgrade being broadcasted
using the RF network
[Auto-Clone on Wakeup]
When turned [On] the TV will
check with every wake up to
see if there is a new clone file
available. This setting can be
used to personalize the TV
experience per guest. For
instance by adapting the
channel list
Note: This might affect the
boot time
56 | P a g e