Specifications; Standard Accessories; Optional Accessories (Sold Separately); Prior To Operation - Hitachi H 45MA Handling Instructions Manual

English

SPECIFICATIONS

Voltage
Power input
Full-load impact rate
Weight (without cord, side handle)
* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Case ............................................................................. 1
(2) Bull Point (SDS max shank) ................................... 1
(3) Side Handle ................................................................ 1
(4) Hexagon Bar Wrench (for 6mm screw) ............... 1
(5) Hexagon Bar Wrench (for 5mm screw) ............... 1
(6) Hexagon Bar Wrench (for 4mm screw) ............... 1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (SOLD
SEPARATELY)
Crushing
(1) Bull Point
Total length: 280 450mm
Asphalt Cutting
(1) Cutter
Surface Roughing
(1) Bushing Tool
Tamping
(1) Rammer
18
(2) Shank
(2) Shank
230V
870W*
3000/min
5.4 kg
Groove digging and edging
(1) Cold chisel
Overall length: 280 400 mm
Scooping Work
(1) Scoop
Hammer Grease A
500g (in a can)
70g (in a tube)
30g (in a tube)
Optional accessories are subject to change without notice.
APPLICATIONS
Breaking concrete, chipping off concrete, grooving, bar
cutting, and driving piles.
Application examples:
Installation of piping and wiring, sanitary facility
installation, machinery installation, water supply and
drainage work, interior jobs, harbor facilities and other
civil engineering work.

PRIOR TO OPERATION

1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specified on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position.
If the plug is connected to a receptacle while the
power switch is in the ON position, the power tool
will start operating immediately, inviting serious
accident.
3. Extension cord
When the work area is removed from the power
source, use an extension cord of sufficient thickness
and rated capacity. The extension cord should be
kept as short as practicable.