Installing the tower server
Connecting devices to the server
The ports for external devices are on the rear of the server. Which ports are available on your server
depend on the boards installed. The standard ports are indicated by symbols.
1 = Monitor port
2 = Serial port 1
3 = Keyboard port
4 = Parallel port
5 = Serial port 2
Ê
Connect the data cables at the server and peripherals.
Some of the devices that you connect require special drivers (see the documentation for
i
the connected device).
If a separate graphics card is used in a slot, then the graphics controller on the system board is
automatically deactivated. The related monitor port (1) cannot be used. Instead, connect the data
cable of the monitor to the monitor port of the graphics card.
A26361-K632-Z100-1-7619
8
9
6 = PS/2 mouse port
7 = CAN-bus port
8 = Slots for additional ports
9 = Slots for additional ports
Installation
1
2
3
C A N
7
4
5
6
13