Specification - LG 50PG6300 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application Range.
This spec sheet is applied to the 42"/50" PDP TV used PG6300 chassis.

2. Specification

Each part is tested as below without special appointment
2.1 Temperature : 25±5°C(77±9°F), CST : 40±5°C
2.2 Relative Humidity : 65±10%
2.3 Power Voltage : Standard input voltage (100~240V@ 50/60Hz)
• Standard Voltage of each products is marked by models.
2.4 Specification and performance of each parts are followed each drawing and specification by part
number in accordance with BOM.
2.5 The receiver must be operated for about 5 minutes prior to the adjustment.
3. Test method
3.1 Performance : LGE TV test method followed.
3.2 Demanded other specification
Safety : CE, IEC specification / EMC : CE, IEC
4. General Specification
No. Item
1. Video input applicable system
2. Receivable Broadcasting System
3. RF Input Channel
4. Input Voltage
5. Market
6. Picture Size
7. Tuning System
8. Operating Environment
9. Storage Environment
10. Display
Copyrightⓒ2008 LG Electronics. Inc. All right reserved
Only for training and service purposes
SPECIFICATION
Specification
PAL -B/G
1) PAL- B/G
2) DVB-T
3) DVB-C
VHF : E2 ~ E12
UHF : E21 ~ E69
CATV : S1 ~ S20
HYPER : S21~ S41
AC 100 ~ 240 V / 50Hz, 60Hz
EU ( Finland )
42 inch
50 inch
Analog : FVS 99 program
DVB-T : 200 ( TV/Radio Channel )
DVB-C : 200 ( TV/Radio Channel )
1) Temp : 5 ~ 35 deg
2) Humidity : 10 ~ 90 %
3) Temp : -20 ~ 50 deg
4) Humidity : 10 ~ 90 %
PDP Module
­6­
Remark
EU(Finland Market)
Analog TV Receiving
Range
42PG6300
50PG6300
LGE ( 42", 50" )
LGE Internal Use Only