AMC2 Wiegand
Extension
4.12
Tamper Protection
To protect the AMC2-4WE against unauthorized access and so
prevent tampering with sensitive data, the AMC2-4WE provides
an additional interface to connect external tamper contacts.
This interface is a potential-free 2-pin pluggable screw
connector marked with T. When not in use this tamper contact
should be shorted.
Figure 4.17: Location of the tamper protection contact
Bosch Sicherheitssysteme GmbH
Installing | en
41
2016-11 | AMC2-4WE |