Turning On Auto Clock Set; Adding/Erasing Channels; Reprogramming Tuner Memory - Optimus 112 (16-549) Owner's Manual

16-549.fm Page 17 Tuesday, July 20, 1999 5:04 PM
When the information is correct and the
time reaches the minute you set in Step 7,
press twice. The currently set time
MENU
appears and the clock starts running.
Note: Seconds begin counting from 00
when you press
MENU

Turning On Auto Clock Set

If you turned off the auto clock set feature and
manually set the VCR's clock, then find that
EDS is available in your area, you can turn the
auto clock set feature back on. This ensures
that the VCR sets itself to the correct time after
a power failure of less than 24 hours.
Follow these steps to turn on auto clock set.
1. Press to display the main menu.
MENU
2. Repeatedly press
light , then press
SET CLOCK
3. Repeatedly press
light AUTO SET , then press
4. Press . The VCR searches for an EDS
CH s
signal and, if it finds one, automatically
sets its clock to the correct time. If the VCR
does not find an EDS signal, follow the
steps under "Manually Setting the Clock"
on Page 16.

Adding/Erasing Channels

We recommend you check the channels the
VCR automatically stored. It might have stored
distant, weak channels that you normally would
not watch, or it might have missed channels
you want to store.
twice.
or to high-
PLAY STOP
.
FAST-F
or to high-
PLAY STOP
.
FAST-F
K
ET
Y
Y
If the tuner stores a channel that you do not
want, repeatedly press (or press and hold)
s or t to tune to that channel, then press
CH
.
ADD/DLT CHANNEL nn DELETED
and the unwanted channel is erased from the
tuner's memory.
CHANNEL 08 DELE TED
If you want to program a weak channel that au-
tomatic programming missed, enter the desired
channel number using the remote control's
number buttons. Then press
appears, and the channel is
NEL nn ADDED
added to memory.
CHANNEL 08 ADDED

Reprogramming Tuner Memory

You might want to reprogram the VCR's tuner
memory if you move or change from an anten-
na connection to a cable TV connection.
Note: You can also quickly erase all settings,
including the time, local channels, and pro-
grammed events, then reprogram the tuner's
memory. See "Resetting the VCR's Memory"
on Page 18.
Follow these steps to reprogram the tuner.
1. Press to display the main menu.
MENU
Note: To exit the programming mode dur-
ing Steps 2–4, press
MENU
CH
appears,
.
ADD/DLT CHAN-
again.
17