NSE/M–1/3/6
Service Software Instructions
Energy Management Calibration... command
Activation
Alt, T,E
This function is for battery a/d and charge current tunings.
Before battery a/d tuning is started a voltage setting request is shown to
user (Set supply voltage to 10,5 V).
When external power is connected and user selects Yes to continue, the
application displays the Energy Management Calibration dialog box:
Dialog mode: modal
Energy Management Calibration dialog has following items:
Settings group box:
1. Run battery & charger default values checkbox (ALT+1):
2. Battery voltage checkbox (ALT+2):
Page 36
Status Bar Text
Calibrate Battery Voltage
Contains EM calibration setting checkboxes:
Runs battery & charger default values to phone when selected
Calibrates battery voltage A/D value.
PAMS
Technical Documentation
Original 08/98