Britax BOULEVARD CLICKTIGHT Canadian User Manual page 21

BRITAX Child Safety, Inc.
Replacing the Cover
1. Attach one side of the
upper shell cover at the
forward-facing belt path,
pull the cover over the
back of the shell, and
secure at opposite belt
path.
2. Replace lower shell cover.
a. Open the
CLICKTIGHT.
b. Tuck one of the plastic
tabs on the lower
shell cover into the
outer side of the shell
between the forward
and rear-facing belt
paths.
c. Tuck the lower shell
cover around the inner
and outer sides of the
shell from the forward-
facing belt paths to the
front of the child seat.
d. Continue replacing
the lower shell cover
around the seat to the
other forward-facing
belt path and tuck the
second plastic tab
into the shell between
the forward and rear-
facing belt paths.
IMPORTANT:
Ensure shell cover is
secured behind red
markers to allow for
proper function of
CLICKTIGHT.
e. Thread the harness
adjuster strap through
the front of the lower
shell cover.
36
2a
2b
2c
2d
2e
BOULEVARD CLICKTIGHT Canadian User Guide
f. Reattach the two
elastic loops at the
front of the lower shell.
3. Replace the belly pad and
buckle:
a. Turn the buckle
retainer sideways and
route it through the
belly pad.
b. Route the belly pad
and buckle retainer
through the buckle slot
in the cover.
– Ensure that the
buckle is through the
correct cover slot for
the buckle position.
c. Turn the buckle
retainer sideways,
route it through the
front buckle slot and
into the desired buckle
position in the child
seat.
4. Pull the seat cover around
the CLICKTIGHT bezel
and over the front of the
seat.
IMPORTANT: The seat
cover must be tucked
behind the red markers
on the CLICKTIGHT bar.
5. Reattach the two elastic
loops on the underside of
the seat cover.
2f
3a
3b
3c
37