Outlines And Dimensions - Mitsubishi PLH-P1.6KAH Technical & Service Manual

7

OUTLINES AND DIMENSIONS

INDOOR UNIT
PLH-P1.6KAH.UK, PLH-P2KAH.UK, PLH-P2.5KAH.UK
PLH-P1.6KAH .UK, PLH-P2KAH
1
25~35
41
Control wire entry
Power line entry
Refrigerant piping side
electric wire entry side
Air intake grill
Liquid pipe
Gas pipe
Optional high-efficiency filter
.UK, PLH-P2.5KAH
1
Ceiling hole
690~710 25~35
640
Suspension bolt pitch
Terminal block for heater
Terminal block for
remote controller
Drain hole
Terminal block for
power supply
117 117
660
Suspension bolt M10 or
W3/8
25
Ceiling surface
466
Air intake hole
460
66
Air outlet hole
760
.UK
1
NOTE 1.The electrical parts box may be removed during servicing.
When connecting the power line and the control wire, provide
enough length to the electric wires.
NOTE 2.When installing the optional high-efficiency filter, the dimension
between the transom and ceiling shall be more than 440mm.
Also, when installing the optional fresh air intake casement or
the multi-functional casement, the dimension between the
transom and ceiling shall be more than 440mm.
(The optional high-efficiency filter can also be installed.)
Models
PLH-P1.6KAH.UK
PLH-P2KAH.UK
PLH-P2.5KAH.UK
PLH-P1.6KAH
PLH-P2KAH
PLH-P2.5KAH
Drain hole
VP-25 connection
Feeding hole
(Drain pump)
Leave space of 10~15mm between the
top surface of the unit and the ceiling slab.
Decorative panel
Vane motor
4-Auto vanes
Intake grille opening/closing side
35
36
1
Refrigerant pipe Refrigerant pipe
([ 9.52mm) ([ 15.88mm)
.UK
Flared connection Flared connection
1
.UK
1 3/8F
.UK
1
A(indication area)
wired panel
wireless panel
Unit : mm
2
5/8F