Related Manuals for Radial Engineering SAT-2
Summary of Contents for Radial Engineering SAT-2
- Page 1 SAT-2 User Guide Radial Engineering Ltd. 1588 Kebet Way, Port Coquitlam BC V3C 5M5 Tel: 604-942-1001 • Fax: 604-942-1010 • Email: info@radialeng.com...
- Page 2 PAGE LEFT BLANK...
-
Page 3: Table Of Contents
Warranty ������������������������������������������������������������������������� Back Cover Thank you for purchasing the SAT-2™, a simple but robust audio attenuator and monitor controller� While the SAT-2 has an intuitive feature set that is designed to be easy to use, please take a few minutes to review this short manual to get the most out of this deceptively powerful device. -
Page 4: Overview
OVERVIEW The SAT-2 gives you the ability to set your levels or attenuate hot signals wherever you might need to� It works as a monitor controller between an audio interface and a set of powered speakers, or to attenuate the output of a recording console before the signal is sent to a recording device�... -
Page 5: Features
FEATURES MONO: Sums the left and right outputs to mono� MUTE: Silences the outputs of the SAT-2� MASTER LEVEL: Sets the overall output level� Passes signal at unity gain (no attenuation) when turned fully clockwise� DIM ON: Used to reduce output levels temporarily without affecting the setting on the master level control�... -
Page 6: Making Connections
SETTING LEVELS The SAT-2 is a unity gain device, which means that when the master level control is turned all the way up (fully clockwise) the SAT-2 outputs have the same signal level as its inputs. When fi rst setting levels, start with the volume turned all the way down, and then slowly turn back up until you reach a comfortable listening level�... -
Page 7: Mute, Mono And Dim
Monitor Controller Parallel Processing Connect between your audio interface and pow- Take the output of a mic preamp into the SAT-2, ered speakers, utilizing the level control and engage the mono switch, and connect one of the mono switch to check phase compatibility. -
Page 8: Block Diagram
Female XLR and 1/4" Jacks RIG HT OUTPUT MUTE SW ITCH LEVEL DIM CONTROL MONO LEFT INPUT Female XLR and 1/4" Jacks LEFT OUTPUT MUTE SW ITCH LEVEL DIM CONTROL * Subject to change without notice. Radial Engineering Ltd. SAT-2™ User Guide... -
Page 9: Specifications
Finish: ������������������������������������������������������������������������������������������������������������������������������������������������� Durable Powder Coat Size (L x W x D): ����������������������������������������������������������������������������������������������������������������������������������������� 5”x3�312”x1�78” Weight: ��������������������������������������������������������������������������������������������������������������������������������������������������������0�70kg (1�55lbs) Conditions:������������������������������������������������������������������������������������������������For use in dry conditions between 5°C and 40°C Warranty: ������������������������������������������������������������������������������������������������������������������������������������ Radial 3-Year, transferable * Subject to change without notice. Radial Engineering Ltd. SAT-2™ User Guide... - Page 10 Notes...
- Page 11 Notes...
- Page 12 3 YEAR TRANSFERABLE WARRANTY RADIAL ENGINEERING LTD� (“Radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according to the terms of this warranty� Radial will repair or replace (at its option) any defective component(s) of this product (excluding finish and wear and tear on components under normal use) for a period of three (3) years from the original date of purchase�...