Alarm And Sleep; Setting The Alarms; Using The Auxiliary Input; Tuning The Am Or Fm Radio - iLive ICP689B User Manual

setting the Alarms

Press the poWer button to turn the unit
1.
off.
Press and hold the AlArM 1 button or
2.
AlArM 2 button.
3. While holding the AlArM 1 or 2 button
press the Hour/MInuTe buttons to adjust
the alarm time.
While holding the AlArM 1 or 2 button
4.
press the sourCe button to adjust the
alarm source. (iPod, Radio, or Buzzer)
Release the AlArM 1 or 2 button to finish
5.
setting the alarm.
6. Press the AlArM 1 or 2 button to activate
or deactivate alarm 1 or 2.

using the Auxiliary Input

1. Connect an MP3 player or other audio
source to the AuxIlIAry InpuT on the
back of the unit.
Requires a 3.5mm Line-Input Cable. (not
included)
Press the poWer button to turn the unit
2.
on.
Press the source button to switch the unit
3.
to Auxiliary Mode.
Use the native controls on the MP3 player
or other audio source to control playback
options.
Use the volume controls on the unit to control
the volume.
Customer Support: 1-888-999-4215

Tuning the AM or FM radio

Press the poWer button to turn the unit
1.
on.
Press the sourCe button to switch to Radio
2.
Mode.
3. Press the AM/FM button to switch between
AM or FM radio mode.
Press the Tune buttons to adjust the AM
4.
and FM radio station when in Radio Mode.
Press and hold the Tune buttons to scan
5.
for the next available AM or FM radio
station.

saving a station as a preset

1. Tune to the desired AM or FM radio station.
2. Press the MeMory button on the remote.
Press the MeMory up/DoWn buttons to
3.
select a memory slot to save the current
radio station to.
Press the MeMory button on the remote,
4.
to save the current AM or FM station to the
selected memory slot.
Up to 20 AM and 20 FM radio stations can be
saved to the unit's memory at one time.

Tuning to a preset

Press the MeMory up/DoWn buttons on
1.
the remote or the preseT buttons on the
unit to cycle through saved AM or FM radio
stations.

Alarm and Sleep

11