A 3,5 hüvelykes merevlemez-
meghajtó visszahelyezése
VIGYÁZAT: A számítógép belsejében végzett munka előtt olvassa el a
számítógép mellé kapott biztonsági tájékoztatót, és kövesse a
elkezdene dolgozni a számítógép belsejében
munkát a számítógép belsejében, kövesse a
számítógép belsejében
meg a Szabályozási megfelelőségi honlapot a
regulatory_compliance
Procedure
1
Place the hard drive in the hard-drive bracket.
2
Align the screw holes on the hard drive with the screw holes on the hard-drive
bracket.
3
Replace the four screws (#6–32 UNC 3.6 mm) that secure the hard-drive
bracket to the hard drive.
4
Slide the hard-drive assembly into the slot on the side-chassis until it snaps into
place.
5
Connect the data cable and the power cable to the hard drive.
6
Rotate the side-chassis towards the computer until it snaps into place.
7
Replace the screw (#6–32 UNC 1/4'') that secures the hard-drive assembly to
the side-chassis.
Post-requisites
1
Replace the
front
2
Replace the
computer
34
utasításait. További biztonsági útmutatásokért tekintse
címen.
bezel.
cover.
utasításait. Miután befejezte a
Miután befejezte a munkát a
www.dell.com/
Mielőtt