Download Print this page

Radio Shack 49-2010 Owner's Manual

Smoke alarm siren detector

Advertisement

Quick Links

49-2020.fm Page 1 Wednesday, August 18, 1999 2:57 PM
Cat. No. 49-2020
OWNER'S MANUAL
Please read before using this equipment.
Smoke Alarm
Siren Detector
for use with the SAFE HOUSE
Wireless Alarm System
(Cat. No. 49-2010/49-2011)

Advertisement

loading

Summary of Contents for Radio Shack 49-2010

  • Page 1 49-2020.fm Page 1 Wednesday, August 18, 1999 2:57 PM Cat. No. 49-2020 OWNER’S MANUAL Please read before using this equipment. Smoke Alarm Siren Detector for use with the SAFE HOUSE Wireless Alarm System (Cat. No. 49-2010/49-2011)
  • Page 2 49-2020.fm Page 2 Wednesday, August 18, 1999 2:57 PM INTRODUCTION Your Radio Shack Smoke Alarm Si- ren Detector gives you extra protec- tion if a smoke alarm is out of normal hearing range. The detector listens for the siren from the smoke alarm.
  • Page 3 49-2020.fm Page 3 Wednesday, August 18, 1999 2:57 PM Notes: • The siren detector does not detect smoke. It only detects the sound from a smoke alarm. • We suggest you use a Radio Shack Cat. No. 49-466 Smoke Alarm with the siren detector.
  • Page 4 49-2020.fm Page 4 Wednesday, August 18, 1999 2:57 PM This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) the device may not cause harmful inter- ference, and (2) the device must accept any interference received, including interference that may cause undesired operation.
  • Page 5: Installation

    49-2020.fm Page 5 Wednesday, August 18, 1999 2:57 PM INSTALLATION INSTALLING THE BATTERY 1. Slide off the battery compartment cover. 2. Connect a 9-volt alkaline battery (Cat. No. 23-553) to the battery connector. Then place the bat- tery in the compartment. illustration...
  • Page 6 49-2020.fm Page 6 Wednesday, August 18, 1999 2:57 PM 3. Replace the battery compart- ment cover. Note: Changing the detector’s bat- tery sometimes triggers the fire alarm. If this happens, turn off the alarm system then turn it on again.
  • Page 7: Connecting To The System

    49-2020.fm Page 7 Wednesday, August 18, 1999 2:57 PM CONNECTING TO THE SYSTEM Follow these steps to add the siren detector to your alarm system. 1. Press on the system’s LEARN base. LEARN indicator flashes. illustration 2. Enter your access code on the base’s keypad.
  • Page 8 49-2020.fm Page 8 Wednesday, August 18, 1999 2:57 PM 3. Press on the siren detector. TEST The system stores the detector’s settings in the next available zone, lights the zone’s indicator, and sounds a brief tone. Note: To assign the siren detec- tor to a zone other than the next available zone, enter the desired zone number.
  • Page 9: Mounting The Detector

    49-2020.fm Page 9 Wednesday, August 18, 1999 2:57 PM MOUNTING THE DETECTOR To ensure the siren detector de- tects the smoke alarm when it sounds, mount the detector 4–6 inches from a UL-approved smoke alarm (Cat. No. 49-466). Follow these steps to mount the de- tector.
  • Page 10 49-2020.fm Page 10 Wednesday, August 18, 1999 2:57 PM 2. Thread the supplied screws into the holes until each screw’s head extends about inch from the wall. 3. Line up the keyhole slots on the detector with the screws on the mounting location, then slide the detector down onto the screws until it is secure.
  • Page 11 49-2020.fm Page 11 Wednesday, August 18, 1999 2:57 PM Notes: • The siren detector can also detect other loud sounds (ste- reos, musical instruments, and so on). Be sure you mount the detector in a location that mini- mizes false alarms. •...
  • Page 12 49-2020.fm Page 12 Wednesday, August 18, 1999 2:57 PM TESTING To test the siren detector, hold down the smoke alarm’s test button until its siren sounds. The indicator on the siren detector flashes briefly and the base sounds an alarm.
  • Page 13 49-2020.fm Page 13 Wednesday, August 18, 1999 2:57 PM UNINSTALLING Follow these steps to remove the siren detector. 1. Press on the base. Then LEARN enter your access code. illustration 2. Enter the zone number for the siren detector. The correspond- ing zone indicator flashes.
  • Page 14 49-2020.fm Page 14 Wednesday, August 18, 1999 2:57 PM NOTES...
  • Page 15 49-2020.fm Page 15 Wednesday, August 18, 1999 2:57 PM...
  • Page 16 This security product is warranted against manufacturing defects in material and workmanship for ninety (90) days from the date of purchase from Radio Shack company owned stores and authorized Radio Shack franchisees and dealers. Within this period Radio Shack will repair the security product without charge for parts and labor.

This manual is also suitable for:

49-202049-2011