Hdstb Setup - LG 26LX1D Owner's Manual

Installation
- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if
you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure
as shown below.
When connecting with a D-sub 15 pin cable
32, 37, 42 inch TV Back
AC IN
G-LINK
REMOTE
CONTROL
PC AUDIO
INPUT
2
(R) AUDIO (L)
Digital Set-top Box
Connect the RGB output of the digital set-top box to the RGB INPUT (PC/DTV INPUT) jack on the set.
1
Connect the audio outputs of the set-top box to the PC AUDIO INPUT jack on the set.
2
3 Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.)
4 Select RGB-DTV input source with using the TV/VIDEO button on the remote control.

HDSTB Setup

DIGITAL AUDIO
(OPTICAL)
OUTPUT
RS-232C INPUT
DVI
(CONTROL/SERVICE)
INPUT
RGB INPUT
COMPONENT1
(PC/DTV INPUT) INPUT
1
RGB-DTV OUPUT
26 inch TV Back
AC IN
OUTPUT
G-LINK
RS-232C INPUT DVI INPUT
REMOTE
(CONTROL/SERVICE)
CONTROL
RGB INPUT
PC AUDIO COMPONENT1 INPUT
(PC/DTV INPUT)
INPUT
2
1
(R) AUDIO (L)
RGB-DTV OUPUT
Digital Set-top Box
DIGITAL AUDIO
(OPTICAL)