Casio Privia PX-870 User Manual page 52

3-2.
If you plan to locate the piano and stand
against a wall, loosen the two screws (one on
the outside of each side panel) that secure
the brackets. You do not need to remove the
screws in this case.
• In this case, you do not need to remove the screws.
Just loosen them.
4.
Insert angle brackets
the anti-tipping bracket and the side panel.
5.
From the outside of side panels
temporarily tighten the screws you loosened
in step 3, above.

into the gap between
I
 
and
6.
Place the two ends of the pedal unit

the brackets and secure them with
screws. Finish with
J
G
7.
While pressing the pedal unit down towards
the floor, securely tighten the screws you
partially tightened in step 5.
,

screw caps.
J
G
E
Getting Ready

onto

EN-51