Panasonic HC-W580 Basic Owner's Manual page 231

Scanning a QR code to set up a connection
≥ Set [Direct Connection Password] to [ON].
1
Press Wi-Fi button on this unit and touch
[Multi Camera].
2
Touch [Unregistered] to register the
smartphone to be connected.
≥ Touching [Unregistered] will start a Wi-Fi connection.
3
Touch [QR code] on the screen of this unit.
4
Start up the smartphone application "Image App".
5
On the smartphone, select [QR code] to scan the QR code displayed on the
screen of this unit.
≥ When using an iOS device, refer to page
≥ When the connection to this unit is complete, the device name of the smartphone will be
displayed on the registration screen in Step 2.
≥ If the QR code cannot be scanned, refer to "Selecting this unit's SSID on the smartphone to set
up a connection". (l
≥ Repeat Steps 2–5 to register and use two or more smartphones.
≥
W580
When using the Sub Camera of this unit, you can use the Wireless Multi-Camera function with
only one registered smartphone. Rotate the Sub Camera to enable it.
6
Touch [ENTER] to complete the registration.
≥
W580
The images being captured by two or more smartphones connected to this unit or by one
smartphone connected to this unit and the Sub Camera of this unit* will be displayed in the Sub
Windows of this unit.
* Displayed if you have connected one smartphone to this unit and enabled the Sub Camera of this
unit.
184)
(l 171)
A [Multi Camera]
B [EXIT]
C [Unregistered]
D [Reset]
E [ENTER]
183 in Step 5.
- 187 -
  
(l 45)
1/2
