JVC AV-29R9B Instructions Manual page 22


# # # #         7 7 7 7 6 6 6 6     8 8 8 8     9 9 9 9     , , , ,     5 5 5 5 : : : :     ; ; ; ;     # # # #     5 5 5 5 3 3 3 3 9 9 9 9             , , , ,
1
Choose a Programme number (PR) in
which a TV channel locked with the
Number buttons or PR LIST.
The screen changes to blue and the
GUARD) appears. You cannot view the TV channel.
2
Press the DISPLAY button to display "ID
NO." (ID number input screen).
3
Press the Number buttons to enter the ID
number.
The lock is temporarily released so you can view the TV
channel.
If you have forgotten the ID number:
Perform step 1 of "To set the CHANNEL GUARD func-
tion". After confirming the ID number, press the TV/
VIDEO button to exit the menu.
Note:
•
•
•
•
& & & &     % % % %     + + + + & & & &     % % % % 6 6 6 6 6 6 6 6
You can set your TV to turn off if no signals are received for
about 15 minutes or longer after the end of a broadcast.
1
Press the
SHUTOFF.
2
Press the
To cancel the AUTO SHUTOFF function:
Press the



buttons to choose AUTO
buttons to choose ON.
buttons to choose OFF.
3
Press the OK button to complete the set-
ting.
The menu disappears.
Note:
•
(CHANNEL
•
        * * * * $ $ $ $ % % % % 2 2 2 2 7 7 7 7     $ $ $ $ 
Set the VIDEO-3 SETTING correctly according to the video
signal input from the external device connected to the VIDEO-
3 terminal. If this setting is incorrect, images will not be dis-
played.
1
Press the
SETTING.
2
Set the VIDEO-3 SETTING according to the
video signal input from the VIDEO-3 termi-
nal.
If normal video signal (composite video signal)
is input:
Press the
If Component video signal (Y/C
input:
Press the
3
Press the OK button to complete the set-
ting.
The menu disappears.
Note:
•
+ −
    ( ( ( ( 5 5 5 5  
buttons to choose VIDEO-3
buttons to choose VIDEO.
/C
B R
buttons to choose COMPONENT.
signals) is