Beckett CG25 Manual page 28

The gunassembly is secured insidethe air tubeby
a spring-loaded jackingscrew. It is springloadedin
orderto controlthe forceit canimpose on the gun
assembly.The screwcan be tightened firmlywith-
out putting excessive pressure on thegunassembly
thatmight d istortthegunor damage itsO-ringseals.
Wheninstalling thejackingscrewlookinsidethe air
tubeto verifythatthe pointed tip of thejackingscrew
pinisseated intothesmall h oleonthelocating padon
top of thegun. Thereis alsoanexternal v erification
of correct a ssembly: whenthescrew is fullytightened,
the e-clipon the top on the centerpinshouldcome
flushwiththetopofthescrew.
inspect Heating System
Regularly
Lack of regular inspections and inadequate
maintenance could lead to equipment
malfunction and result in asphyxiation, explo-
sion or fire.
(Always follow the appliance manufacturer's recommend-
ed service instructions, when available.)
* The following checklist is intended to be used as a
minimum reference guide only and does not super-
sede or replace the heating appliance manufacturer's
recommended service and maintenance instructions
or any code requirements.
* Consult the installation and service instructions pro-
vided by the individual control or component manu-
facturer and carefully follow their directions.
* Maintenance and testing may be required more fre-
quently due to dusty or severe operating conditions.
* If unusual or questionable performance is observed,
shut the system down and contact your qualified ser-
vice agency immediately.
28 6104 BCGSO R08