Electrolux ETE4607SA-R Installation Manual page 8

8 electrolux.com.au
INSTALLATION (CONTINUED)
1.3 - Joining the Appliances
Your appliances are delivered with hole covers that cover
the screw holes. These holes are located on the top of the
cabinet, opposite from the door hinge. Carfully remove
these covers, care must be taken to avoid damaging the
appliances.
Carefully pull the appliances together adjacent to the final
installation location, then adjust the front and rear feet to
the same height.
1.3.1 - Top-front and bottom-rear bracket installation
Install the top-front bracket
• Assemble the top-front bracket, fit the 6 screws
in place, but do not tighten them yet leave the
screws loose.
Install the rear-bottom bracket
• Unscrew the 2 central-upper compressor
cover fasteners.
• Remove 2 screws.
• Assemble the rear-bottom bracket reusing
the screws.
Remove covers
Do not tighten