Connecting Headphones - JVC LT-19DK8WJ Instructions Manual

Equipment which can output the
composite signal such as a VCR
Connect the equipment to the EXT-1 or
EXT-3 terminal.
Equipment which can output the
S-VIDEO signal (Y/C signal)
Connect the equipment to the EXT-3
terminal.
Equipment which can output the
component signals (Y/Pb/Pr)
Connect the equipment to the EXT-2
terminal.
Equipment which can output the
digital audio/video signal (HDMI)
such as a DVD player
Connect the equipment to the EXT-4 HDMI
terminal.

Connecting headphones

Connect the headphones with a stereo mini-
jack (3.5 mm diameter) to the headphone
jack socket.
• No sound comes from the TV speakers
when the headphones are connected.
TV output from the EXT-1 terminal
The video/sound signal of an Analogue
terrestrial broadcasting channel you are
viewing is always output from the EXT-1
terminal.
• Changing over a programme number (Pr.)
also changes over the TV output from the
EXT-1 terminal.
• The video/sound signal from an EXT
terminal cannot be output.
• Teletext programmes cannot be output.
Connecting speakers/amplifier
While referring to the audio equipment
connection diagram, connect the audio
equipment you want to the TV.
You can use external front speakers to listen
to the TV sound instead of the TV speakers.
Before connecting anything:
• Read the manuals provided with the
amplifier and speakers.
• Turn the TV and amplifier off.
• Note that connecting cables are not
supplied.
R
L
1 Amplifier
2 External speakers (Magnetic-shielded type)
• Remember to install the Ferrite core on
the audio cable. See "Using the Ferrite
cores" on page 8.
• The volume level through the AUDIO
OUT terminals can be adjusted using the
(Volume)
remote control.
• When you connect your audio system to
the AUDIO OUT terminals, the sound
will be output from the speakers of the TV
and the speakers of your audio system. To
mute the sound from the speakers of the
TV, press the
remote control.
• The DIGITAL AUDIO OUT terminal can
output PCM and Dolby Digital sound
signals. Dolby Digital sound is only
available when the TV receives the signal
and the Dolby Digital function is turned
on (see "Dolby Digital" on page 32).
Additional preparation
OR
buttons on the TV or
(Muting) button on the
51