Nomenclature And Functions - Omron S8VK-X Communications Manual

1-2

Nomenclature and Functions

This section describes the nomenclature and functions of the S8VK-X.
In the following, the position of each part is indicated by number, and its contents are shown in a list.
 With Indication Monitor
(14)
(15)
(16)
(18)
* The above figure shows S8VK-X48024A-EIP.

Nomenclature and Functions

Terminal
No.
name
(1) L1
(2) L2
(3) N1
(4) N2
(5) PE
(6) +V1
(7) +V2
(8) -V1
(9) -V2
(10) -V3
(11) ---
(12) ---
(13) ---
(14) ---
Switch-mode Power Supplies Communications Manual (T213)
(6)(7)(8)(9)(10)
(11)
(12)
(13)
(19)
(17)
(1)(2)(3)(4)(5)
Name
Input terminals
Protective Earth terminal (PE)
DC Output terminals
Output indicator (DC ON: Green)
Alarm indicator (ALM: Red)
Output voltage adjuster (V. ADJ)
Main display (white)
1 Product Overview
 Without Indication Monitor
(6)(7)(8)(9)(10)
(16)
(18)
(1)(2)(3)(4)(5)
* The above figure shows S8VK-X48024-EIP.
Function
Connect the input lines to these terminals.
Connect the ground line to this terminal.
Connect the load lines to these terminals.
The green indicator indicates when a DC voltage is
being output.
Lights up in red when a Power Supply abnormality
occurs. Refer to 1-6 Self-Diagnosis Information on
page 1-8 for details.
Use to adjust the output voltage.
Displays measured values.
1
(11)
(12)
(13)
(19)
(17)
*1
*2
1 - 3