Presetting Tv Channels; Manual Scan - JVC AV-14AE19D Instructions Manual

Presetting TV channels

AUTO SCAN
1
MENU AUTO SCAN
2
or
3
to stop or when AUTO SCAN finishes.
4
MANUAL SCAN screen appears (\ MANUAL SCAN).

MANUAL SCAN

1
MENU MANUAL SCAN
2
or
3
To search for a 1. Select the PR number you wish to store the
channel manually channel.
2. Press the
(SEARCH)
the present channel. Searching stops when the
following channel is found.
To fine-tune a channel 1. Select the channel you wish to fine-tune.
(FINE) 2. Press the
obtained.
4
to exit.
AUTO SCAN
VH
OK : MANUAL SCAN
MANUAL SCAN
PR CH / CC
05 CC 06
06 CH 05
07 CH 08
08 CH 10
09 CH 12
-/+ : SEARCH-/+
/ : FINE-/+
DISPLAY : COLOUR SYSTEM
button to start searching from
or button until a clear picture is
INSERT / DELETE
After this operation, other channel's PR number will be changed.
1
MENU INSERT / DELETE
2
or
3
To add the new 1. Select the PR number you wish to store the new
channel (INSERT) channel.
2. Press the
3. Press
4. Enter the CH/CC number for the channel you wish to
add. The TV starts to search for the channel.
Certain channels are not available in some countries.
If you cannot receive a channel by INSERT, use
MANUAL SCAN.
• Refer to "CH/CC List" (\ Page 9)
To delete a
Select the channel you wish to delete and press
channel (DELETE)
To change the PR 1. Select the PR number you wish to move.
number (MOVE) 2. Press the
3. Press
4. Press
4
to exit.
INSERT / DELETE
PR CH / CC
05 CC 06
06 CH 05
07 CH 08
08 CH 10
09 CH 12
VOLUME+ : INSERT
MOVE
MUTING : DELETE
button.
button to choose "CH" or "CC".
button.
or button to move it to the new PR number.
button.
.
7