Installation
Step-6: Installing Antenna Base to the Tilt Plate
Step-7: Fixing Antenna Base and Tilt Plate
2-14
Install antenna base to the tilt plate through center pin.
Tilt plate pin
Fit the antenna base hole to the centre pin of tilt plate
Fix the elevation adjusting bolt from mount plate by washer, spring
washer and lock bolts.
Adjust antenna slot base and elevation adjusting bolt
Fujitsu and Fujitsu Customer Use Only
Antenna base
hole
Elevation fixing
bolt
BroadOne GX4000 Manual (R3.0) issue 1.03