Priority Scan; Dtmf Calling; Manual Dialing - Kenwood TK-290 Instruction Manual

■

Priority Scan

For Priority Scan to function, the
Priority1 or Priority2 channel must
be programmed.
• If only one of the priority channels are
programmed, the transceiver will
automatically change to that priority
channel when a signal is received on
it. This change occurs even if a
signal is being received on another
channel.
• If both priority channels are
programmed, Priority1 is the high
priority and Priority2 is the low
priority. If a signal is being received
on the Priority1 channel, the
transceiver will change to that
channel, even if a signal is being
received on the Priority2 channel.

DTMF CALLING

This function can only be used by
Note:
transceivers with DTMF keypads.
■

Manual Dialing

To dial a number manually:
1 Press and hold the PTT switch.
• If Keypad Auto PTT is enabled
{page 16}, you do not need to
press the PTT switch.
2 Press the desired DTMF keys.
13