Description And Part Functions; Ignition Switch; Brake Pedal; Gas Pedal - Coleman CK100-S Owner's Manual

DESCRIPTION AND PART FUNCTIONS

3
6

Ignition Switch (1)

ignition switch is placed in the
(ON) position the engine can start.
When the ignition switch is placed
in the (OFF) position the engine will
not start, or will turn off, if running.
1
Brake Pedal (3): Depressing the
brake pedal will stop the Go Kart.
Note: Always check brakes before
operation
Gas Pedal (4): Depressing gas pedal
will increase engine RPMs causing
Go Kart to move forward.
5
4
Parking Brake (5): Depressing the
brake pedal and activating the Park-
ing brake pin will set the parking
brake.
Note: Always set parking brake
before starting the Go-Kart
7

Speed limiter bolt/(6)

To limit the top speed, turn the
throttle pedal speed regulator bolt
(6) counter clockwise until the
desired stop position is achieved.
Re-tighten Jam nut (7) against
the skid plate once adjustment is
completed.
7
: When the