Calling; Answering A Call; Making A Call; Voice Dialing - LG HBM-905 User Manual

How to use

Calling

Answering a call

- When there is an incoming call, the Headset will ring with caller number.
- Briefly press the CALL button to answer an incoming call.

Making a call

- If you make a call from the handset, the call will (subject to phone settings)
automatically transfer to the Headset. If the call is not automatically
transferred, you can manually transfer the call by briefly pressing the CALL
button on the HBM-905 (Headset and handset must be paired).

Voice dialing*

- Briefly press the CALL button to activate "Voice Command". You will get the
best results if you record the voice dialing tag through your Headset.
NOTE: If the handset does not support Voice Dialing, it is possible that
performing this action will activate Last Number redial.

Last number redial*

- Press and hold the CALL button for 1second to activate "Last Number
Redial". The Headset will beep, and call the last number dialed.

Ending a call

- Briefly press the CALL button.

Transferring a call*

- While on a call on your handset, briefly press the CALL button to transfer the
audio to the Headset.(Headset and handset must be paired).
- And to transfer a call from the Headset to handset, press and hold VOLUME
button for 3 seconds.

Call waiting*

- Answer a second call without hanging up the first call by pressing the CALL
button for 1second. Press the CALL button for 1second to return to the
original call.
- Briefly press the CALL button to terminate the active call or both calls at
once. (subject to handset's support)

Call Reject*

- Activate Call Reject by pressing the CALL button for 1second when the
handset rings.
* It is possible to use these functions only when your handset supports them.
For further information about using these features, please consult your
handset's user manual.
8

Multipoint

The LG HBM-905 is capable of having two handsets connected to the
Headset at the same time. This will give you the freedom of having only
one Headset to operate both your handsets.

Multipoint Connect

- Pair the Headset with one of your Bluetooth-enabled handsets.(per the
pairing instructions on pages 5-6).
- Turn off the Headset.
- With the power off hold the CALL button and move the PWR switch to
ON position, to enter Manual Pairing mode.
- Now, pair and connect the Headset with your other Bluetooth-enabled
handset. (This will be your Primary handset).
- Once this handset is paired and connected, go back and connect the
first paired handset to Headset. (This will be your Secondary handset).
* Note: When the HBM-905 is connected to two handsets at the same
time (Multipoint), the Headset calling functions will work with the most
recently used handset.
Calling Function
- Voice Dial and Last Number Redial features work with the Primary
handset. (most recently used handset).
- The first connected device is set as primary handset and the next
connected device is set as secondary handset.
- The device which made the last outgoing call will always be set as the
primary handset.

Voice Prompt/Caller ID

The LG HBM-905 is capable of announcing the caller's number, and
confirmations of headset operation.
How to use
9