Call Setup - Haier HC-C2100 User Manual

HC-C2100 User Guide
access to your RUIM card will be restricted each time the phone is powered on.
1) PIN lock
If you set PIN to 'On', the phone will ask for PIN each time it is switched on. You can get
PIN code from your mobile phone service provider.
2) PIN change
This option is used to change PIN code.
After enter the old code, the phone will ask for enter a new code to replace the old one.
The new code must be entered again as confirmation.
Note: The 'PIN Lock' option must be set to 'On' before you can proceed.

8.4 Call setup

Using this function you can set the incoming/outgoing call setup given below.
8.4.1 Auto answer
A unique feature of the phone is the ability to answer an incoming call automatically after 3
seconds.
Selecting 'After 3sec' will automatically answer the incoming call.
Selecting 'Off' shuts off the auto answer function.
8.4.2 Voice privacy
If your mobile phone service provider supports this feature, this voice privacy feature
protects the privacy of your current phone conversation from other callers who are placing
phone calls on the same network as yours.
8.4.3 Answer call
You can answer a call by pressing "Any key" or "Send key".
8.4.4 Show call time
This function includes 'Show' and 'Hide' options. If it can be set to 'Show', the phone
displays the duration of the current call.
8.4.5 Call forward
Call forward is a network service.
This service is used to forward incoming calls to your voice mail service or to another
number depending on certain conditions in which your phone is unavailable or you don't
want to receive any call.
30