Wacom DTK-2400 Installation Manual & Hardware Manual page 95

Hide thumbs Also See for DTK-2400:
Table of Contents

Advertisement

Contents
CAUTION
Do not disassemble the Grip Pen. This may cause the device to malfunction. In this case,
Wacom shall have no responsibility to repair or replace the product.
Do not strike hard objects with the pen, such as repeatedly tapping the pen against a desk
surface. Doing so may cause damage to the pen.
Do not apply excessive pressure or stress to the pen tip, eraser, or side switch. This may
cause may cause premature failure or malfunction.
Only use a replacement pen tip (nib) specified for your product by Wacom.
Do not scratch the display screen. Avoid placing sharp objects on the display screen
surface.
Avoid intensive shock or vibration to Cintiq, the Cintiq stand, or the Grip Pen. Hitting or
dropping Cintiq may damage the display screen or other components.
Do not put heavy objects on the pen display or push against it with a strong force; this may
damage the display screen or break the Cintiq stand locking mechanism.
Do not place heavy articles on the pen display cabling, repeatedly bend the cables sharply,
or apply heavy stress to the cable connectors; this may damage the unit or cabling.
Do not store the pen display on a surface that would excessively bend or crimp the cable.
If your pen display has a coated surface, a worn pen nib that is sharp or angular may cause
damage. Replace the pen tip if necessary.
Do not use any organic solvent (e.g. alcohol) or even mild detergent to clean the display
screen. Use of these cleaners can damage the display screen. Damage of this kind is not
covered by the manufacturer's warranty.
Before cleaning, always disconnect your product from the AC power source.
To clean the display screen, use an anti-static cloth or a slightly damp cloth. When
cleaning, apply only a light amount of pressure to the display screen and do not make
the surface wet.
To clean the Cintiq casing, Cintiq stand, or Grip Pen, use a slightly dampened (with
water), soft cloth.
Always disconnect Cintiq from the AC power source if the unit appears to be
malfunctioning, or has been damaged by a fall or in some other manner.
Contents
9
9

Advertisement

Table of Contents
loading

Table of Contents