Rear Panel; Connecting Your System To The Power Supply - Samsung HW-K20 User Manual

Rear Panel

1 2 3

Connecting your System to the Power Supply

1. AUX IN 1 Terminal
Use an Audio Cable (supplied) to connect
AUX IN 1 on the product to Audio Out on an external
analogue component.
2. AUX IN 2 Terminals
Use an Audio Cable (not supplied) to connect AUX IN 2
on the product to Audio Out on an external analogue
component.
• Be sure to match connector colours.
• If the external analogue component has only one Audio
3. SUBWOOFER Connector Terminal
4. FRONT L Connector Terminal
5. POWER SUPPLY IN
4 5
Before plugging your system into a main socket, you must
check the voltage.
1. Connect the AC power adaptor jack to the power supply
jack properly, and then connect the AC power adaptor
plug in the wall outlet.
• When disconnecting the power cable of the AC power
adaptor from a wall outlet, pull the plug. Do not pull the
cable.
• Do not connect this unit or other components to an AC
outlet until all connections between components are
complete.
· 5 · English
Out jack, connect to either the left or right terminal.