Stroke Input Method - Nokia E63 User Manual

For example, if you are writing text in Chinese and want
to use Latin characters to add a name, select
Input options Writing language, and the writing
>
language that allows you to use Latin characters.
Switch input methods
To switch input methods, press and hold
function key, and press the key repeatedly at the
same time, until the symbol for the desired input
method is shown on the display, or press
select a different input method.

Stroke input method

The strokes constituting Chinese characters can be
divided into the following five categories: horizontal,
vertical, left-falling, dot, and turning. These strokes
categories correspond to the R, T, Y, F, and G keys
respectively. The strokes are classified into the five
categories according to the following table.
22
Cyan Cyan
Options
>
+ the
and to
1. Stroke input: Enter the strokes of a Chinese
character according to its standard stroke order. To
enter a stroke, press once the key corresponding to
that stroke. Candidate Chinese characters matched
to the inputted strokes are shown on the display.
To delete the stroke to the left of the cursor, press
the backspace key. To delete all the strokes to the
left of the cursor, press and hold the backspace key.
2. Enter Chinese characters: Move the scroll key to
scroll through the candidate characters. Highlight
the character you need, and then press the scroll
key to input it.
3. Deal with the predicted characters: The device then
predicts and lists the candidate characters which
Magenta Magenta Yellow Yellow Black Black