ABB REQ650 Product Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Power distribution unit
  5. Relion REQ650
  6. Product manual

ABB REQ650 Product Manual

Relion 650 series breaker protection
Hide thumbs Also See for REQ650:
Table of Contents

Advertisement

Quick Links

See also: Commissioning Manual , Manual
®
Relion
650 series
Breaker protection REQ650
Product Guide

Advertisement

Table of Contents
loading

Related Manuals for ABB REQ650

Summary of Contents for ABB REQ650

  • Page 1 ® Relion 650 series Breaker protection REQ650 Product Guide...

  • Page 2: Table Of Contents

    11. Metering..............26 Disclaimer The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any errors that may appear in this document. © Copyright 2012 ABB.

  • Page 3: Series Overview

    REQ650 provides an optimized stand alone product. This IED also enables well- The 650 series IEDs provide optimum 'off-the- structured and reliable protection and control shelf', ready-to-use solutions.
  • Page 4 ANSI IEC61850 TCS SCBR SPVN ZBAT DRP RDRE S SIMG IEC61850 IEC10000321-2-en.vsd IEC10000321 V2 EN Figure 1. Typical application example of the REQ650 A01 used as backup protection in a single busbar single breaker arrangement when three-phase trip is required...
  • Page 5 ANSI SPVN ZBAT IEC61850 TCS SCBR DRP RDRE S SIMG IEC61850 IEC10000322-2-en.vsd IEC10000322 V2 EN Figure 2. Typical application example of the REQ650 A11 used as backup protection in a single busbar single breaker arrangement when single-phase trip is required...
  • Page 6 ANSI ANSI TCS SCBR SPVN ZBAT DRP RDRE S SIMG IEC61850 IEC61850 IEC10000323-2-en.vsd IEC10000323 V2 EN Figure 3. Typical application example of the REQ650 B11 used as backup protection in double busbar single breaker arrangement when single-phase trip is required...

  • Page 7: Available Functions

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 3. Available functions...
  • Page 8 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Back-up protection functions IEC 61850/ ANSI Function description Breaker Function block name Current protection PHPIOC Instantaneous phase overcurrent 0–1 protection, 3–phase output SPTPIOC Instantaneous phase overcurrent 0–1 protection, phase segregated output...
  • Page 9 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC 61850/ ANSI Function description Breaker Function block name ROV2PTOV Two step residual overvoltage 0–1 protection LOVPTUV Loss of voltage check 0–1 Frequency protection SAPTUF Underfrequency function 0–2 SAPTOF Overfrequency function 0–2...
  • Page 10 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Control and monitoring functions IEC 61850/Function ANSI Function description Breaker block name Control SESRSYN Synchrocheck, energizing check, 0–1 and synchronizing SMBRREC Autorecloser for 3–phase operation 0–1 STBRREC Autorecloser for 1/3–phase 0–1...
  • Page 11 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC 61850/Function ANSI Function description Breaker block name Logic SMPPTRC Tripping logic, common 3–phase 0–1 output SPTPTRC Tripping logic, phase segregated 0–1 output TMAGGIO Trip matrix logic Configurable logic blocks, OR gate...
  • Page 12 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC 61850/Function ANSI Function description Breaker block name VMMXU Phase-phase voltage measurement CMSQI Current sequence component measurement VMSQI Voltage sequence measurement VNMMXU Phase-neutral voltage measurement AISVBAS Function block for service values...
  • Page 13 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC 61850/Function ANSI Function description Breaker block name I103MEAS Measurands for IEC60870-5-103 I103MEASUSR Measurands user defined signals for IEC60870-5-103 I103AR Function status auto-recloser for IEC60870-5-103 I103EF Function status earth-fault for...
  • Page 14 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Communication IEC 61850/Function ANSI Function description Breaker block name Station communication IEC61850-8-1 IEC 61850 communication protocol DNPGEN DNP3.0 for TCP/IP communication protocol RS485DNP DNP3.0 for EIA-485 communication protocol CH1TCP DNP3.0 for TCP/IP...
  • Page 15 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC 61850/Function ANSI Function description Breaker block name RS485103 IEC60870-5-103 serial communication for RS485 GOOSEINTLKRCV Horizontal communication via GOOSE for interlocking GOOSEBINRCV GOOSE binary receive ETHFRNT Ethernet configuration of front...
  • Page 16 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Basic IED functions IEC 61850/Function Function description block name Basic functions included in all products INTERRSIG Self supervision with internal event list SELFSUPEVLST Self supervision with internal event list TIMESYNCHGEN...

  • Page 17: Current Protection

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 4. Current protection Instantaneous residual overcurrent protection Instantaneous phase overcurrent protection, 3- EFPIOC phase output PHPIOC The Instantaneous residual overcurrent protection The instantaneous three phase overcurrent EFPIOC has a low transient overreach and short...
  • Page 18 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 use either the residual current or residual power the function is triggered. These conditions ·cos j, for operating quantity. component 3U ·3I increase the security of the back-up trip command.

  • Page 19: Voltage Protection

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 to electrical or mechanical failures. An open depends on the fault current return paths, but the phase can cause negative and zero sequence cable negative sequence impedance is practically currents which cause thermal stress on rotating constant.

  • Page 20: Frequency Protection

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Two step residual overvoltage protection disturbance in the system. SAPFRC can be used ROV2PTOV function calculates the residual for generation shedding, load shedding and voltage from the three-phase voltage input remedial action schemes.

  • Page 21: Control

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 the presence of the negative-sequence current SESRSYN function includes a built-in voltage selection scheme for double bus and 1½ breaker or ring busbar arrangements. The zero sequence detection algorithm is...

  • Page 22: Logic

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Local remote LOCREM /Local remote control Selector mini switch VSGGIO LOCREMCTRL The Selector mini switch VSGGIO function block The signals from the local HMI or from an external is a multipurpose function used for a variety of local/remote switch are applied via the function applications, as a general purpose switch.
  • Page 23 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 • AND function block. Tripping logic phase segregated output SPTPTRC • SRMEMORY function block is a flip-flop that A function block for protection tripping is can set or reset an output from two inputs provided for each circuit breaker involved in the respectively.

  • Page 24: Monitoring

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 10. Monitoring • Event list • Indications IEC61850 generic communication I/O function • Event recorder SPGGIO • Trip value recorder IEC61850 generic communication I/O functions • Disturbance recorder (SPGGIO) is used to send one single logical signal to other systems or equipment in the substation.
  • Page 25 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 report function that have changed status during a (maximum 40 analog and 96 binary signals). The disturbance. binary signals available are the same as for the event recorder function. Event recorder DRPRDRE...

  • Page 26: Metering

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 information based on the gas pressure in the 12. Human Machine interface circuit breaker is used as input signals to the Local HMI function. In addition, the function generates alarms based on received information.

  • Page 27: Station Communication

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 to internal system events generated by the While the IED is in test mode, all protection different built-in self-supervision elements. The functions are blocked. internal events are saved in an internal event list.
  • Page 28 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 channel transmission is blocked until the event Disturbance files are accessed using the IEC changes is below the quota, no event is lost. 61850-8-1 protocol. Disturbance files are available to any Ethernet based application via All communication connectors, except for the FTP in the standard Comtrade format.

  • Page 29: Hardware Description

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 The functions IEC60870-5-103 Optical serial (RS485103) are used to configure the communication (OPTICAL103) and communication parameters for either the optical IEC60870-5-103 serial communication for RS485 serial or RS485 serial communication interfaces.

  • Page 30: Connection Diagrams Customized

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 16. Connection diagrams Customized Connection diagrams for 650 series IEC12000593 V1 EN Figure 6. Designation for 3U, 1/1x19" casing with 1 TRM IEC12000594 V1 EN Figure 7. Designation for 3U, 1/1x19" casing with 1 TRM and 1 AIM...
  • Page 31 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000595 V1 EN Figure 8. Communication module (COM)
  • Page 32 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000596 V1 EN Figure 9. Power supply module (PSM) 48-125V DC...
  • Page 33 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000597 V1 EN Figure 10. Power supply module (PSM) 110-250V DC, 100–240V AC IEC12000598 V1 EN Figure 11. Transformer module (TRM)
  • Page 34 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000599 V1 EN Figure 12. Analog input (AIM) IEC12000600 V1 EN Figure 13. Binary input/output (BIO) option...

  • Page 35: Connection Diagrams Configured

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 17. Connection diagrams Configured IEC12000533 V1 EN Figure 14. Designation for 3U, 1/1x19" casing with 1 TRM...
  • Page 36 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Connection diagrams for REQ650 A01 IEC12000534 V1 EN Figure 15. Communication module (COM)
  • Page 37 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000535 V1 EN Figure 16. Power supply module (PSM) 48-125V DC...
  • Page 38 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000536 V1 EN Figure 17. Power supply module (PSM), 110-250V DC, 100–240V AC...
  • Page 39 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000537 V1 EN Figure 18. Transformer module (TRM)
  • Page 40 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000538 V1 EN Figure 19. Binary input/output (BIO) option...
  • Page 41 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Connection diagrams for REQ650 A11 IEC12000540 V1 EN Figure 20. Communication module (COM)
  • Page 42 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000541 V1 EN Figure 21. Power supply module (PSM) 48-125V DC...
  • Page 43 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000542 V1 EN Figure 22. Power supply module (PSM), 110-250V DC, 100–240V AC...
  • Page 44 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000543 V1 EN Figure 23. Transformer module (TRM)
  • Page 45 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000544 V1 EN Figure 24. Binary input/output (BIO) option...
  • Page 46 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000545 V1 EN Figure 25. Binary input/output (BIO) option...
  • Page 47 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Connection diagrams for REQ650 B11 IEC12000547 V1 EN Figure 26. Communication module (COM)
  • Page 48 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000548 V1 EN Figure 27. Power supply module (PSM) 48-125V DC...
  • Page 49 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000549 V1 EN Figure 28. Power supply module (PSM), 110-250V DC, 100–240V AC...
  • Page 50 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000550 V1 EN Figure 29. Transformer module (TRM)
  • Page 51 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000551 V1 EN Figure 30. Binary input/output (BIO) option...
  • Page 52 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 IEC12000552 V1 EN Figure 31. Binary input/output (BIO) option...

  • Page 53: Technical Data

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 18. Technical data General Definitions Reference value The specified value of an influencing factor to which are referred the characteristics of the equipment Nominal range The range of values of an influencing quantity (factor) within which, under specified conditions,...
  • Page 54 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Auxiliary AC and DC voltage Table 3. Power supply Description 600PSM02 600PSM03 nominal 48, 60, 110, 125 V DC 100, 110, 120, 220, 240 V AC, 50 and 60 Hz...
  • Page 55 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 6. Power output relays without TCS function Description Value Rated voltage 250 V AC/DC Continuous contact carry Make and carry for 3.0 s 15 A Make and carry for 0.5 s...
  • Page 56 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 10. X8/IRIG-B and EIA-485 interface Type Protocol Cable Screw terminal, pin row IRIG-B Shielded twisted pair cable header Recommended: CAT 5, Belden RS-485 (9841- 9844) or Alpha Wire (Alpha 6222-6230)
  • Page 57 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 14. Optical serial port (X9) Wave length Fibre type Connector Permitted path attenuation 820 nm MM 62,5/125 µm 6.8 dB (approx. 1700m length with 4 db / km glass fibre core...
  • Page 58 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 18. Environmental tests Description Type test value Reference Cold tests operation 96 h at -25ºC IEC 60068-2-1/ANSI C37.90-2005 16 h at -40ºC (chapter 4) storage 96 h at -40ºC...
  • Page 59 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Type tests according to standards Table 19. Electromagnetic compatibility tests Description Type test value Reference 100 kHz and 1 MHz burst IEC 61000-4-18, level 3 disturbance test IEC 60255-22-1 ANSI C37.90.1-2002 •...
  • Page 60 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 19. Electromagnetic compatibility tests, continued Description Type test value Reference Voltage dips and short interruptionsc Dips: IEC 60255-11 on DC power supply 40%/200 ms IEC 61000-4-11 70%/500 ms Interruptions: 0-50 ms: No restart 0...∞...
  • Page 61 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 20. Insulation tests Description Type test value Reference Dielectric tests: IEC 60255-5 ANSI C37.90-2005 • Test voltage 2 kV, 50 Hz, 1 min 1 kV, 50 Hz, 1 min, communication...
  • Page 62 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 EMC compliance Table 23. EMC compliance Description Reference EMC directive 2004/108/EC Standard EN 50263 (2000) EN 60255-26 (2007) Current protection Table 24. Instantaneous phase overcurrent protection, 3-phase output PHPIOC Function...
  • Page 63 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 26. Four step phase overcurrent protection, 3-phase output OC4PTOC Function Setting range Accuracy Operate current (5-2500)% of lBase ± 1.0% of I at I ≤ I ± 1.0% of I at I > I Reset ratio >...
  • Page 64 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 27. Four step phase overcurrent protection, phase segregated output OC4SPTOC Function Setting range Accuracy Operate current (5-2500)% of lBase ± 1.0% of I at I £ I ± 1.0% of I at I > I Reset ratio >...
  • Page 65 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 29. Four step residual overcurrent protection EF4PTOC Function Range or value Accuracy Operate current (1-2500)% of lBase ± 1.0% of I at I < I ± 1.0% of I at I > I Reset ratio >...
  • Page 66 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 30. Sensitive directional residual overcurrent and power protection SDEPSDE Function Range or value Accuracy Operate level for 3I ·cosj (0.25-200.00)% of lBase ± 1.0% of I at I £ I directional residual ±...
  • Page 67 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 30. Sensitive directional residual overcurrent and power protection SDEPSDE, continued Function Range or value Accuracy Reset time, non-directional 120 ms typically at 1.2 to 0.8 x U residual overvoltage Operate time, directional 260 ms typically at 0.5 to 2 x I...
  • Page 68 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 32. Breaker failure protection, 3-phase activation and output CCRBRF Function Range or value Accuracy Operate phase current (5-200)% of lBase ± 1.0% of I at I £ I ± 1.0% of I at I > I Reset ratio, phase current >...
  • Page 69 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 34. Stub protection STBPTOC Function Range or value Accuracy Operating current (1-2500)% of IBase ± 1.0% of I at I £ I ± 1.0% of I at I > I Reset ratio >...
  • Page 70 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 38. Negative sequence based overcurrent function DNSPTOC Function Range or value Accuracy Operate current (2.0 - 5000.0) % of IBase ± 1.0% of I at I <I ± 1.0% of I at I > I Reset ratio >...
  • Page 71 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 40. Two step overvoltage protection OV2PTOV Function Range or value Accuracy Operate voltage, low and high step (1-200)% of UBase ± 0.5% of U at U < U ± 0.5% of U at U > U Reset ratio >95%...
  • Page 72 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 42. Loss of voltage check LOVPTUV Function Range or value Accuracy Operate voltage (0–100)% of UBase ± 0.5% of U Reset ratio <105% Pulse timer (0.050–60.000) s ± 0.5% ± 25 ms Timers (0.000–60.000) s...
  • Page 73 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 45. Rate-of-change frequency protection SAPFRC Function Range or value Accuracy Operate value, start function (-10.00-10.00) Hz/s ± 10.0 mHz/s Operate value, restore enable frequency (45.00 - 65.00) Hz ± 2.0 mHz Timers (0.000 - 60.000) s...
  • Page 74 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Control Table 49. Synchronizing, synchrocheck and energizing check SESRSYN Function Range or value Accuracy Phase shift, j (-180 to 180) degrees line Voltage ratio, U 0.500 - 2.000 line Reset ratio, synchrocheck >...
  • Page 75 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 50. Autorecloser for 3-phase operation SMBRREC Function Range or value Accuracy Number of autoreclosing shots 1 - 5 Autoreclosing open time: shot 1 - t1 3Ph (0.000-60.000) s ± 0.5% ± 25 ms shot 2 - t2 3Ph (0.00-6000.00) s...
  • Page 76 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 51. Autorecloser for 1/3-phase operation STBRREC Function Range or value Accuracy Number of autoreclosing shots Autoreclosing open time: Shot 1 - t1 (0.000-60.000) s ± 0.5% ± 25 ms...
  • Page 77 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 54. Configurable logic blocks Logic block Quantity with cycle time Range or value Accuracy 5 ms 20 ms 100 ms INVERTER SRMEMORY RSMEMORY GATE PULSETIMER (0.000–90000.000) s ± 0.5% ± 25 ms for...
  • Page 78 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 57. Disturbance report DRPRDRE Function Range or value Accuracy Current recording ± 1,0% of I at I ≤ I ± 1,0% of I at I > Ir Voltage recording ±...
  • Page 79 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 60. Event recorder DRPRDRE Function Value Buffer capacity Maximum number of events in disturbance report Maximum number of disturbance reports Resolution 1 ms Accuracy Depending on time synchronizing Table 61. Trip value recorder DRPRDRE...
  • Page 80 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 65. Insulation liquid monitoring function SSIML Function Range or value Accuracy Alarm, oil level 0.00-25.00 Oil level lockout 0.00-25.00 Temperature alarm -40.00-200.00 Temperature lockout -40.00-200.00 Timers (0.000-60.000) s ± 0.5% ± 110 ms Table 66.
  • Page 81 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Station communication Table 69. Communication protocol Function Value Protocol TCP/IP Ethernet Communication speed for the IEDs 100 Mbit/s Protocol IEC 61850–8–1 Communication speed for the IEDs 100BASE-FX Protocol DNP3.0/TCP Communication speed for the IEDs...
  • Page 82 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Inverse time characteristics Table 73. ANSI Inverse time characteristics Function Range or value Accuracy Operating characteristic: k = (0.05-999) in steps of 0.01 æ ö ç ÷ × ç ÷...
  • Page 83 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 75. RI and RD type inverse time characteristics Function Range or value Accuracy RI type inverse characteristic k = (0.05-999) in steps of 0.01 × 0.236 0.339 EQUATION1137-SMALL V1 EN...
  • Page 84 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Table 77. Inverse time characteristics for undervoltage protection Function Range or value Accuracy Type A curve: k = (0.05-1.10) in steps of 0.01 ±5% +60 ms æ ö < - ç...

  • Page 85: Ordering For Customized Ied

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 19. Ordering for Customized IED Guidelines Carefully read and follow the set of rules to ensure problem-free order management. Be aware that certain functions can only be ordered in combination with other functions and that some functions require specific hardware selections.
  • Page 86 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Logic Rule: One tripping logic type only must be ordered Note: Selection of Tripping Logic type rules the selection of Instantaneous phase Overcurrent protection, Four step phase Overcurrent protection, Breaker Failure protection and Autorecloser.
  • Page 87 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Voltage protection Two step undervoltage protection (UV2PTUV) Qty: 1MRK 004 910-AB Two step overvoltage protection (OV2PTOV) Qty: 1MRK 004 910-BB Two step residual overvoltage protection (ROV2PTOV) Qty: 1MRK 004 910-CB...
  • Page 88 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Optional hardware Human machine interface Rule: One must be ordered. Display type Keypad symbol Case size Local human machine interface (LHMI) 3U 1/1 19" 1KHL160055R0001 Local human machine interface (LHMI) ANSI 3U 1/1 19"...

  • Page 89: Ordering For Configured Ied

    To obtain the complete ordering code, please combine code from the tables, as given in the example below. Exemple code: REQ650*1.2-A01X00-X00-B1A5-B-A-SA-AB1-RA3-AXXX-E. Using the code of each position #1-11 specified as REQ650*1-2 2-3-4 4-5-6-7 7-8 8-9 9-10 10 10 10-11 - 10...
  • Page 90 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Mounting details with IP40 of protection from the front Notes and Rules No mounting kit included Rack mounting kit for 3U 1/1 x 19" Selection for position #6. Connection type for Power supply, Input/output and...
  • Page 91 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Communication and processing module Notes and Rules Slot position (rear view) 12BI, IRIG-B, RS485, Ethernet, LC optical, ST serial Selection for position #11.

  • Page 92: Ordering For Accessories

    Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 21. Ordering for Accessories Configuration and monitoring tools Front connection cable between LCD-HMI and PC Quantity: 1MRK 001 665-CA LED Label special paper A4, 1 pc Quantity: 1MRK 002 038-CA...
  • Page 93 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Rule: Specify the number of printed manuals requested Operation manual Quantity: 1MRK 500 095-UEN Technical manual Quantity: 1MRK 505 281-UEN Commissioning manual Quantity: 1MRK 505 282-UEN Application manual Quantity: 1MRK 505 280-UEN...
  • Page 94 Breaker protection REQ650 1MRK 505 283-BEN - Product version: 1.2 Related documents Documents related to REQ650 Identity number Application manual 1MRK 505 280-UEN Technical manual 1MRK 505 281-UEN Commissioning manual 1MRK 505 282-UEN Product Guide 1MRK 505 283-BEN Type test certificate...
  • Page 96 Contact us ABB AB Substation Automation Products SE-721 59 Västerås, Sweden Phone +46 (0) 21 32 50 00 +46 (0) 21 14 69 18 www.abb.com/substationautomation...

Table of Contents