ZyXEL Communications PMG2006-T20A User Manual page 107

Table 51 Parental Control Rule: Add/Edit (continued)
LABEL DESCRIPTION
Redirect Select this to redirect users who access any blocked websites listed above to the Zyxel Family
blocked site to Safety page as shown next.
Zyxel Family
Figure 70 Zyxel Family Safety Page Example
Safety page
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Click Security > Parental Control > Add New PCP > Add New Service to open the following screen.
Figure 71 Parental Control Rule: Add/Edit Rule > Add New Service
The following table describes the fields in this screen.
Table 52 Parental Control Rule: Add/Edit > Add New Service
LABEL DESCRIPTION
Service Name Select the name of the service. Otherwise, select User Define and manually specify the protocol
and the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Protocol Select the transport layer protocol used for the service. Choices are TCP, UDP, or TCP & UDP.
Port Enter the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Chapter 14 Parental Control
PMG2006-T20A User's Guide
107