Table of Contents
Advertisement
Ge ng to know your Phone
Removing the Ba ery Cover &
installing the ba ery
Removing the Ba ery Cover
1. Hold the device rmly and locate the cover release latch.
2. Place your ngernail in the opening and remove the cover according to
the arrow direc on.
Installing the Ba ery
1. With the metallic contacts of the ba ery facing the metallic contacts in
the ba ery slot, press the ba ery down un it locks into the place.
2. Ensure the ba ery is inserted in the phone. To charge the ba ery, plug
in the charger connector at your phone (USB interface) and then plug the
other end into an AC power socket.
The ba ery symbol indicates the charging status. While charging, the
charge indicators will scroll. When all the scroll bars are steady, the
ba ery is fully charged. Disconnect the charger from the phone, and then
disconnect the charger from the AC power socket.
A en on: If the ba ery is powerless, the ba ery icon will reappear a er
a few minutes of charging.
49
Advertisement
Table of Contents
